Skip to content

Purchasing Trailer Hubs – Get the right trailer hub

Purchase Trailer Hubs – Find the best trailer hub

Which trailer hub will I require to buy?

The first step in moving forward when purchasing an axle hub for your trailer is to figure out the type of hub you’ll need to buy to fit your particular trailer. Finding the right hub to fit your particular trailer can be much easier than you imagine. The easiest method to be sure that you have the right hub is to take it off the trailer. After that, take off the rear and front bearings and seals (without any damage). After you have removed the bearings, you’ll be able identify a number from the inside of the bearing, or determine the inside diameter that the bearing has.

Step 1. On the reverse of the trailer bearing are a reference to the size of the spindle, and is the simplest method to identify the right hub. If a number isn’t visible on the bearing, then you’ll need an instrument to determine the inside dimensions of the bearing.

Click here for Alko hubs.

Step 2. Choose the proper seal. This is a crucial aspect because the seal works maintain the oil in the inner of the hub. Certain seals are stamped with numbers to facilitate cross reference while some require measuring. If you are required measures to take of the seal, then you’ll need to measure the inside as well as the outside diameter. There are between three or more seals that can be used for specific bearings. That’s why using only either the outside or inside dimensions isn’t suggested. A majority of trailers employ the double lip seal when they’re applying grease, and those that use oil require the triple lip seal or even one that’s a unitized oil seal.

Step 3. Examine the number of studs on the hub. The hubs on trailers are equipped with 4 5, 6, and 8 studs, depending on how much capacity is available on the axle. If you own an axle with five studs, then you have some work to be done, so go to step 4. If your hub has 4 6 or 8 studs, your job is completed and you should be able purchase the right hub!

Step 4. Examine the bolt’s pattern.

Wheel hubs for trailers are a crucial part of moving trailers, the wheel hub assembly joins the trailer to the axle and helps in facilitating their spin. If they get corroded or incorrectly installed, it could cause the tires of the trailer to be out of alignment and cause significant harm to the vehicle as well as the trailer.

The function for the hub of the wheel is to act to act as a glue for the axle and the tire The tires are connected by screws to the wheel hub. The hub assembly is then fitted onto the axle which connects the tire and the other components of the vehicle. The wheel hub acts as the bridge that connects the tire to the whole vehicle. If one of its components fails, it causes a ripple effect that can lead to a number of problems like a faulty steering or a damaged axle.

How to tell if a Hub is a Good Hub from. an Unprofessional Hub

There are a few indicators to be aware of in order to determine if you have the presence of a “bad” hub for a wheel

A noticeable vibration or rubbing sound could be a sign of one or the other regarding the hub of the wheel. It could indicate an indication that the bearing has damaged and requires replacement If the noise is apparent while the vehicle is in motion, the entire assembly could need replacing.

While a grinding or rubbing sounds is most evident indication that something is wrong, a sound of hum coming from the wheels may signal that there is an issue.

In determining the size of Wheel Hub you require

Wheel hubs aren’t one-size-fits-all components, they come in a variety of dimensions depending on the size of wheel bearings and the size of the load.

You’ll need to determine how many lug bolts in one wheel. The majority of hubs on trailers contain five or four lugs on each hub or wheel. (Heavier duty trailers typically include 8 or 6 lugs)

If the hubs of the trailer are equipped with an even number of bolts that hold the wheel, take a measurement by comparing the central point of one bolt with the middle of the bolt that is directly opposite with a ruler, tape measure, or caliper. The pattern of the hub bolt can depend on the number of lug bolts as well as the distance between each opposing hub bolt. All except 5-lug bolt patterns are determined this way.

In 5-lug hubs, the measurement is different. Choose any lug bolt to determine the distance from the back of one lug and the center of the other lug which is directly to its left. (Be certain to not miss one bolt when you measure the distance, and take measurements in any direction.)